Lasercut Jigsaw
i

Neon22Lasercut Jigsaw

Neon22

An extension for Inkscape that creates jigsaw shaped pieces. Options for back, and single-cut pieces. Creates a jigsaw puzzle for laser cutting. - set dimensions in various units, - number of pieces in X,Y, - randomness and size of tabs, - rounded corners, and a backing as an option. - packed neatly for minimal cutting. Uses minimal lines to optimize for laser cutting (e.g. when using packed backboard). [Edited to work in Inkscape 1.0+] [Install from "Manage Extensions" on Extensions Tab for a simpler life] --- Review by Martin Owens on May 12 2021 2:05 PM pytest coverage 0% pylint score 0.36/10 Working in Inkscape 1.1 - 1.3


Comment here...
Lasercut tabbed box
i

Neon22Lasercut tabbed box

Neon22

Creates a tabbed box with kerf setting for tight fits. Or dimples for press fits. - set dimensions in various units, - width, depth, height, material thickness, - choose number of tabs for each dimension, - include corners or not, - kerf adjustable - if tight fit required, or - can use dimples for pressure fits for wood etc (rounds or triangles), or - can set zero kerf and use minimal material to create. In all cases - uses minimal lines to optimise for laser cutting. You will find it under the Render menu in Extensions. [Edit: fixed for Inkscape 1.0] --- Reviewed by Martin Owens on May 12 2021 2:48 PM pytest coverage: 0% pylint score: 2.85/10 tested in Inkscape 1.1 - 1.3


Comment here...
Instrument Scale Thumb
i

Neon22Instrument Scale Thumb

Neon22

Instrument_scale. Create a linear or circular arc display suitable for various kinds of panel meter. Settings for range, tick marks, labels, and angles for the circular option. Many minor improvements to label placement, corner cases fixed, etc. Useful unicode char for Temperature = ° Appears under Extensions/Render Inkscape 1.0 - 1.3


Comment here...
Zoetrope maker
i

Neon22Zoetrope maker

Neon22

Zoetrope maker. - Prints disk of given diameter and number of images around the outside. - Also includes a pulse trigger ring to trigger a strobe. - Width and phase of the pulse can be defined. - Prints image references for paint programs. - Both distorted and undistorted - for use in a paint program to size/scale/distort the source inages to fit onto the Disk. Excellent Hardware to make a working Zoetrope can be found here: http://drehkino.de/3Drehkino_en.php Works in Inkscape 1.0


Comment here...
Inkscape Eurorack
i

Neon22Inkscape Eurorack

Neon22

Eurorack Panel Designer Enables the design of front panels for Eurorack format typically used in audio equipment. Can be used for laser cutting or for panel layout and design. The Eurorack format calls for modules of 128.5mm (slightly over 5") height. Horizontal width is measured in "horizontal pitch", where 1 HP = 5.08mm (exactly 0.2"). 3.5mm mono phone jacks are used for interconnection. more info: https://en.wikipedia.org/wiki/Eurorack Appears in: Extensions->Render->Eurorack Panel Designer Works in Inkscape 1.0 - 1.3


Comment here...
PianoScale
i

Neon22PianoScale

Neon22

Designed to illustrate Piano scales. Can input Key and start and end notes as well as intervals. Can also choose locrian etc from menu. Will draw single scales as well as help sheets for entire pages. Appears in Extensions/Music/PianoScale Inkscape 1.0 - 1.3


Comment here...
Luthier Fret Ruler
i

Neon22Luthier Fret Ruler

Neon22

An Inkscape extension that draws full sized Fretboards for stringed instruments. Guitar, Ukulele, Banjo, Dulcimer, etc Appears in Extensions menu under Music. Will draw a fret ruler in three useful ways: 1. Ruler - ideal as a Lasercut metal rule or paper printout, 2. Template - to be used as a guide in a router or table saw, - e.g. https://youtu.be/0niBEfb5csk?t=95 3. Full neck to be printed and glued onto the neckstock for accurate sawing and marking. Includes fret marker placement and tapered necks. Scales: The fretboard can be drawn with a single scale or in a fanned format with two scales, on the bass and treble sides of the fretboard. The methods for constructing scales are: - 12th root of 2 - ratios of 17.817, 17.835, or 18 - scala files. Also draws a curved arc template for curved fretboards. This is in two styles: 1. Block - to be extruded into a sanding block or neck support. Possibly using the Inkscape to openscad extension to export to an STL for 3D printing. or: 2. Thin finger-like tabs to set the correct heights of strings at the saddle. Be sure to unzip the scales zip enclosed into the same directory. It will create a scales folder with 4580 interesting .scl (scala) files to choose from. There is a special tab in the extension for finding useful scales in this enormous resource. Works in Inkscape 1.0 - 1.3


Comment here...