Inkscape.org
Using Inkscape with Cutters/Plotters Using 305 Engineering Raster Engrave extension
  1. #1
    fyshious fyshious @fyshious

    I am using the 305 Engineering Raster Engrave extension with Inkscape Ver0.94.4 and having a problem as shown in the attached pic. It etches a double image in the middle characters but not on the end ones. I have tried playing with the settings in the extension but either no effect or makes it worse. I use Mach3 for CAM. I haven't found any other reference to this on this forum and am asking for some help please.

    Has anyone else experienced this and what can be done about it or should I be using a later version of Inkscape?

    Thanks

    Doug

    Img 3029
  2. #2
    Tyler Durden Tyler Durden @TylerDurden⚖

    I'd try contacting the extension developer. https://github.com/305engineering/Inkscape

    Many extensions are from 3rd party developers and not under the control of the Inkscape project.

  3. #3
    fyshious fyshious @fyshious

    Thanks for that. I was wondering if any one else had had the same problem but I will try the developers.

    Thanks again

Login Now
Inkscape Inkscape.org Inkscape Forum Using Inkscape with Cutters/Plotters Using 305 Engineering Raster Engrave extension

Forums developed by Martin, Jabier, Mihaela. Contact Us if you have a problem using the forum.