Inkscape tutorial: Thư pháp

Inkscape

Tutorial | Thư pháp

Một trong những công cụ độc đáo mà Inkscape cung cấp cho bạn là công cụ Thư pháp, công cụ tạo nét viết đẹp. Bài thực hành này sẽ hướng dẫn bạn làm quen với cách thức làm việc với công cụ Thư pháp, cũng như một số kỹ thuật cơ bản của thư pháp.

Use Ctrl+arrows, mouse wheel, or middle button drag to scroll the page down. For basics of object creation, selection, and transformation, see the Basic tutorial in HelpTutorials.

Vài nét lịch sử về Thư pháp

Trong từ điển, Thư pháp có nghĩa là thuật viết chữ đẹp, nghệ thuật tạo ra chữ viết tay đẹp và thanh nhã. Nghe có vẻ phức tạp, nhưng nếu bạn bỏ thời gian tập một chút, bạn có thể lãnh hội nghệ thuật này ngay.

Up until roughly 1440 AD, before the printing press was around, calligraphy was the way books and other publications were made. A scribe had to handwrite every individual copy of every book or publication. Perhaps the most common place where the average person will run across calligraphy today is in the realm of motivating handlettering wall art, though.

Có 3 phong cách thư pháp chính:

  • Western or Roman: The preserved texts are mainly written with a quill and ink onto materials such as parchment or vellum.

  • Arabic, including other languages in Arabic script, executed with a reed pen and ink on paper. (This style has produced by far the largest bulk of preserved texts before 1440.)

  • Chinese or Oriental, executed with a brush.

The three styles have influenced each other on different occasions. Western lettering styles used throughout the ages include Rustic, Carolingian, Blackletter, etc.

Today, one great advantage that we have over the scribes of the past is the Undo command: If you make a mistake, the entire page is not ruined. Inkscape's Calligraphy tool also enables some techniques which would not be possible with a traditional pen-and-ink.

Phần cứng

You will get the best results if you use a tablet and pen. Thanks to the flexibility of our tool, even those with only a mouse can do some fairly intricate calligraphy, though there will be some difficulty producing fast sweeping strokes.

Inkscape cho phép sử dụng các chức năng cảm ứng lực ấncảm ứng góc nghiêng của bàn vẽ điện tử, nếu có. Tuy nhiên các chức năng này mặc định là không được sử dụng, vì chúng ta phải cấu hình thiết bị trước khi dùng. Và bút lông chim hay bút mực thường không bị ảnh hưởng nhiều bởi lực ấn bút, khác hẳn với bút lông dùng trong thư pháp Trung Quốc.

If you have a tablet and would like to utilize the sensitivity features, you will need to configure your device. This configuration will only need to be performed once and the settings are saved. To enable this support you must have the tablet plugged in prior to starting Inkscape and then proceed to open the Input Devices... dialog through the Edit menu. With this dialog open you can choose the preferred device and settings for your tablet pen. Lastly, after choosing those settings, switch to the Calligraphy tool and toggle the toolbar buttons for pressure and tilt. From now on, Inkscape will remember those settings on startup.

Bút thư pháp của Inkscape cũng rất nhạy với tốc độ nét vẽ được thực hiện (xem phần "Thu hẹp" ở dưới), nên nếu dùng chuột thì bạn nên đặt tham số này là 0.

Các tuỳ chọn cho công cụ Thư pháp

Switch to the Calligraphy tool by pressing Ctrl+F6, pressing the C key, or by clicking on its toolbar button. On the top toolbar, you will notice there are 8 options: Width, Thinning, Mass, Angle, Fixation, Caps, Tremor and Wiggle. There are also two buttons to toggle tablet Pressure and Tilt sensitivity on and off (for drawing tablets), as well as a dropdown menu with a few presets to select from, and the option to save your own presets.

Rộng & Thu hẹp

This pair of options control the width of your pen. The width can vary from 1 to 100 and (by default) is measured in units relative to the size of your editing window, but independent of zoom (symbolized as %). This makes sense, because the natural “unit of measure” in calligraphy is the range of your hand's movement, and it is therefore convenient to have the width of your pen nib in constant ratio to the size of your “drawing board” and not in some real units which would make it depend on zoom. This behavior is optional though, so it can be changed for those who would prefer absolute units regardless of zoom. To switch the unit, simply use the unit selector after the Unit field.

Độ rộng ngòi bút có thể thay đổi thông qua các phím mũi tên tráiphải hoặc qua lực nhấn lên bàn vẽ nếu chức năng cảm ứng lực ấn được bật, nên bạn có thể điều chỉnh nó mà không cần phải truy cập vào Thanh điều khiển công cụ. Các phím này làm việc ngay khi bạn vẽ, nên bạn có thể thay đổi độ rộng của nét vẽ từ từ trong lúc rê chuột:

Pen width may also depend on the velocity, as controlled by the thinning parameter. This parameter can take values from -100 to 100; zero means the width is independent of velocity, positive values make faster strokes thinner, negative values make faster strokes broader. The default of 10 means moderate thinning of fast strokes. Here are a few examples, all drawn with width=20 and angle=90:

For fun, set Width and Thinning both to 100 (maximum) and draw with jerky movements to get strangely naturalistic, neuron-like shapes:

Góc & Độ cố định

Sau khi điều chỉnh độ rộng ngòi bút, góc di bút cũng là một tham số quan trọng trong thư pháp. Giá trị Góc được tính bằng độ: 0 độ tương ứng với khi ngòi bút nằm ngang, 90 độ tương ứng với khi ngòi bút nằm dọc ngược chiều kim đồng hồ và -90 độ tương ứng với khi ngòi bút nằm dọc theo chiều kim đồng hồ. Lưu ý là nếu bạn bật cảm ứng độ nghiêng của bàn vẽ lên, tham số Góc sẽ bị bỏ đi và bạn chỉ có thể dùng bút trên bàn vẽ điện tử để thay đổi góc nghiêng này.

Each traditional calligraphy style has its own prevalent pen angle. For example, the Uncial hand uses the angle of 25 degrees. More complex hands and more experienced calligraphers will often vary the angle while drawing, and Inkscape makes this possible by pressing up and down arrow keys or with a tablet that supports the tilt sensitivity feature. For beginning calligraphy lessons, however, keeping the angle constant will work best. Here are examples of strokes drawn at different angles (fixation = 100):

Như bạn thấy, nét bút trở nên mảnh nhất khi được vẽ song song với Góc đặt bút, và rộng nhất khi vẽ vuông góc với Góc đặt bút. Các góc dương thường cho cảm giác tự nhiên, mô phỏng nét chữ viết bằng tay phải.

The level of contrast between the thinnest and the thickest is controlled by the fixation parameter. The value of 100 means that the angle is always constant, as set in the Angle field. Decreasing fixation lets the pen turn a little against the direction of the stroke. With fixation=0, pen rotates freely to be always perpendicular to the stroke, and Angle has no effect anymore:

Khi bạn đặt Độ cố định bằng 1, bạn sẽ thu được các mặt chữ cổ như Times hoặc Bodoni, giống như phần bên trái hình trên (vì chúng là các mặt chữ mô phỏng thư pháp được tạo ra với nét bút không đổi). Khi đặt Fixation bằng 0, ta thu được các mặt chữ hiện đại như Sans Serif hoặc Helvetica, giống phần bên phải.

Nét run:

Tremor is intended to give a more natural look to the calligraphy strokes. Tremor is adjustable in the Controls bar with values ranging from 0 to 100. It will affect your strokes producing anything from slight unevenness to wild blotches and splotches. This significantly expands the creative range of the tool.

Wiggle & Mass

Không giống các tham số về độ rộng và góc ở phần trước, 2 tham số này định nghĩa cách thức công cụ Thư pháp “cảm nhận” hơn là vẽ ra một thứ gì trên tài liệu của bạn. Cho nên trong phần này sẽ không có hình minh họa nào cả, và bạn sẽ phải thử thực hành nhiều lần để hiểu hơn về chúng.

Wiggle is the resistance of the paper to the movement of the pen. The default is at minimum (0), and increasing this parameter makes paper “slippery”: if the mass is big, the pen tends to run away on sharp turns; if the mass is zero, high wiggle makes the pen to wiggle wildly.

In physics, mass is what causes inertia; the higher the mass of the Inkscape calligraphy tool, the more it lags behind your mouse pointer and the more it smoothes out sharp turns and quick jerks in your stroke. By default this value is quite small (2) so that the tool is fast and responsive, but you can increase mass to get slower and smoother pen.

Các ví dụ về Thư pháp

Sau khi đã hiểu sơ sơ về các khả năng của công cụ Thư pháp, bạn hãy dùng nó để thử tạo ra một tác phẩm thư pháp xem sao! Nếu bạn chưa bao giờ tập vẽ thư pháp, hãy kiếm cho mình một cuốn sách hay về nghệ thuật này và học nó trên Inkscape. Chương này cho bạn xem một số ví dụ về thư pháp.

Trước hết, để viết một lá thư, bạn cần phải tạo ra một cặp thước kẻ để định vị nét bút. Nếu bạn viết chữ nghiêng hay chữ thảo, hãy thêm một số đường gióng nghiêng giữa 2 thước kẻ. Ví dụ:

Sau đó phóng to để sao cho chiều cao giữa 2 thước kẻ tương ứng với độ di chuyển cổ tay của bạn, rồi đặt các tham số độ rộng và góc trước khi viết!

Probably the first thing you would do as a beginner calligrapher is practice the basic elements of letters — vertical and horizontal stems, round strokes, slanted stems. Here are some letter elements for the Uncial hand:

Một số mẹo nhỏ:

  • If your hand is comfortable on the tablet, don't move it. Instead, scroll the canvas (Ctrl+arrow keys) with your left hand after finishing each letter.

  • If your last stroke is bad, just undo it (Ctrl+Z). However, if its shape is good but the position or size are slightly off, it's better to switch to Selector temporarily (Space) and nudge/scale/rotate it as needed (using mouse or keys), then press Space again to return to Calligraphy tool.

  • Sau khi hoàn tất một từ, hãy chuyển sang công cụ Chọn và điều chỉnh lại cho phù hợp. Đừng làm quá, vì các bản thư pháp đẹp phải giữ lại tính bất quy tắc của nét vẽ tay. Tránh vội vàng sao chép các chữ và các thành phần của chữ: hãy vẽ những nét nguyên bản.

Và đây là một số ví dụ hoàn chỉnh về Thư pháp:

Kết luận

Thư pháp là một công cụ rất lý thú; nó dùng để diễn tả cả một nghệ thuật, có thể được áp dụng cho tất cả các sáng tạo của bạn. Hãy học cách dùng Thư pháp và ứng dụng nó một cách hiệu quả trong các ảnh mà bạn thiết kế. Enjoy!

Authors: Bulia Byak; Jonathan Leighton; Josh Andler; Colin Marquardt; Kris De Gussem; Nicolas Dufour; Guillaume Audirac; Gellért Gyuris; e-sonego; Maren Hachmann

Translators: Clytie Siddall — 2006; Nguyễn Đình Trung — 2008

Header / footer design: Esteban Capella — 2019