HI Guys, hope this is an easy solution to my question. Just got back into CNC have 20 years away from it!
Using Inksacpe to create the g-code to use with Mach 3.
I hace created a logo whick middles / centres. When I simulate the cut path it is cutting the perimeter first and not the centres, which is not desirable.=
So is there and option to set the cut order so it cuts the centres of letters out first befor cutting out the actual letter.
Hope some one can help me !!!!. Finding inkscape a bit confusing, used Abobe Illustrator in my day job for 25 years, so there is a lot of differences to get my head around !
Beginners' Questions SETTING G CODE CUT PATH ORDER IN INKSCAPE
Inkscape.org
HI Guys, hope this is an easy solution to my question. Just got back into CNC have 20 years away from it!
Using Inksacpe to create the g-code to use with Mach 3.
I hace created a logo whick middles / centres. When I simulate the cut path it is cutting the perimeter first and not the centres, which is not desirable.=
So is there and option to set the cut order so it cuts the centres of letters out first befor cutting out the actual letter.
Hope some one can help me !!!!. Finding inkscape a bit confusing, used Abobe Illustrator in my day job for 25 years, so there is a lot of differences to get my head around !
Thanks in advance for any help
This is a duplicate. I already answered here: https://inkscape.org/forums/questions/setting-g-code-cut-path-order-in-inkscape_rjOVY/